PRODUCTS

-

Classification

Classification



Reducer

Special Type

Home page

Dimensions of NCH horizontal single-phase geared motor

Category：

Reducer

Description

Dimensions of NCH horizontal single-phase geared motor

NCH

―

100

―

____

horizontal

box number

power

speed ratio

motor

brake

Installation method

Outgoing direction

100

1/3

C: single phase

blank: no brake

Refer to P.xx

twenty two

200

1/5

S: three-phase

M: Power off brake

400

●

YM: Hand release brake

750

●

DM: Electric brake

1500

●

2200

1/2000

3700

Qutput shaft
box number	P	Q	S	T	In
18	30	27	18	20.5	5
twenty two	40	35	twenty two	25.5	7
28	45	40	28	31	7
32	55	50	32	37	10
40	65	60	40	45	10
50	80	75	50	55	14

Parameters Table:

Horsepower HP	Reduction ratio	box number	A1	A	D	AND	F	G	H	J	K	L	M	X	Y	FROM	Weight kg
Horsepower HP	Reduction ratio	box number	A1	A	D	AND	F	G	H	J	K	L	M	X	Y	FROM	Weight kg
0.1KW 1/8HP	5-50	18	260	250	40	110	135	62	10.5	16.29	46.5	12	133	140	85	110
	60-200	twenty two	285	275	65	130	158	90	12	17.66	58	14	133	154	97.5	110
	250-1800	twenty two	375	365	65	130	158	90	12	17.66	58	14	133	154	97.5	110
	250-1800	28	400	390	90	140	173	120	12	23.11	61.5	15	133	177	116	110
0.2KW 1/4HP	5-10	18	295	285	40	110	135	62	10.5	16.29	46.5	12	133	140	85	110<119>
	12.5-90	twenty two	320	310	65	130	158	90	12	17.66	58	14	133	154	97.5	110<119>
	100-200	28	345	335	90	140	173	120	12	23.11	61.5	15	133	177	116	110<119>
	250-1800	32	490	480	130	170	215	160	13	30.22	79.5	20	133	217	138.5	110<119>
0.4KW 1/2HP	5-10	twenty two	335	325	65	130	158	90	12	17.66	58	14	165	172	97.5	125<134>
	12.5-90	28	355	345	90	140	173	120	12	23.11	61.5	15	165	177	116	125<134>
	90-200	32	395	385	130	170	215	160	13	30.22	79.5	20	165	217	138.5	125<134>
	250-1800	40	555	545	150	210	265	185	15	42.2	82	twenty four	165	295	160	125<134>
0.75KW 1HP	5-25	28	375	365	90	140	173	120	12	23.11	61.5	15	165	177	116	125<134>
	30-120	32	415	405	130	170	215	160	13	30.22	79.5	20	165	217	138.5	125<134>
	120-200	40	450	440	150	210	265	185	15	42.2	82	twenty four	165	295	160	125<134>
	250-1800	50	655	645	170	265	335	230	19	51.4	120	33	165	370	200	125<134>
1.5KW 2HP	5-30	32	435	435	130	170	215	160	13	30.22	79.5	20	193	217	138.5	135
	30-100	40	470	470	150	210	265	185	15	42.2	82	twenty four	193	295	160	135
	100-200	50	560	560	170	265	335	230	19	51.4	120	33	193	370	200	135
2.2KW 3HP	5-10	32	465	465	130	170	215	160	13	30.22	79.5	20	193	217	138.5	135
	5-40	40	500	500	150	210	265	185	15	42.2	82	twenty four	193	295	160	135
	40-120	50	590	590	170	265	335	230	19	51.4	120	33	193	370	200	135
3.7KW 5HP	5-10	40	515	515	150	210	265	185	15	42.2	82	twenty four	225	295	160	148
3.7KW 5HP	15-120	50	600	600	170	265	335	230	19	51.4	120	33	225	370	200	148

1. A is a three-phase deceleration motor, and A1 is a three-phase deceleration brake motor.
2. 1/8HP single-phase size is the same as 1/4HP, 1/4HP～1HP single-phase size is the same as three-phase size.
3. <> is the brake size.
4. Models 40-50 already include the size of the O-shaped lifting ring. If the model 18-32 needs to be equipped with an O-shaped lifting ring, the height dimension needs to be increased by 45mm.