PRODUCTS

-

Classification

Classification



Reducer

Special Type

Home page

NCV vertical single-phase geared motor

1. A is a three-phase deceleration motor, and A1 is a three-phase deceleration brake motor. 2. 1/8HP single-phase size is the same as 1/4HP, 1/4HP～1HP single-phase size is the same as three-phase size. 3. <> is the brake size. 4. If you need to match the O-shaped lifting ring, the height dimension needs to be increased by 45mm.

Category：

Reducer

Description

NCV vertical single-phase geared motor dimensions

NCV

―

100

―

____

vertical

box number

power

speed ratio

motor

brake

Installation method

Outgoing direction

100

1/3

C: single phase

blank: no brake

Refer to P.xx

twenty two

200

1/5

S: three-phase

M: Power off brake

400

●

YM: Hand release brake

750

●

DM: Electric brake

1500

●

2200

1/2000

3700

Qutput shaft
box number	P	Q	S	T	In
18	30	27	18	20.5	5
twenty two	40	35	twenty two	25.5	7
28	45	40	28	31	7
32	55	50	32	37	10
40	65	60	40	45	10
50	80	75	50	55	14

Parameters Table:

Horsepower HP	Reduction ratio	box number	A1	A	D	AND	F	G	H	J	K	L	M	X	Y	FROM	Weight kg	flange
Horsepower HP	Reduction ratio	box number	A1	A	D	AND	F	G	H	J	K	L	M	X	Y	FROM	Weight kg	flange
0.1KW 1/8HP	5-50	18	260	250	50	140	120	120	10.5	16.29	40	11	133	99	5	110		A1
	60-200	twenty two	285	275	148	185	176	160	12	17.66	47.5	12	133	130	3.5	110		A2
	250-1800	twenty two	375	365	148	185	176	160	12	17.66	47.5	12	133	130	3.5	110		A2
	250-1800	28	400	390	170	220	204	193	12.5	23.11	56	13	133	155	4	110		A2
0.2KW 1/4HP	5-10	18	295	285	50	140	120	120	10.5	16.29	40	11	133	99	5	110<119>		A1
	12.5-90	twenty two	320	310	148	185	176	160	12	17.66	47.5	12	133	130	3.5	110<119>		A2
	100-200	28	345	335	170	220	204	193	12.5	23.11	56	13	133	155	4	110<119>		A2
	250-1800	32	490	480	185	255	238	224	13	30.22	67	16	133	180	4	110<119>		A2
0.4KW 1/2HP	5-10	twenty two	335	325	148	185	176	160	12	17.66	47.5	12	165	130	3.5	125<134>		A2
	12.5-90	28	355	345	170	220	204	193	12.5	23.11	56	13	165	155	4	125<134>		A2
	90-200	32	395	385	185	255	238	224	13	30.22	67	16	165	180	4	125<134>		A2
	250-1800	40	555	545	230	310	297	276	15	42.2	81	18	165	219	5	125<134>		A2
0.75KW 1HP	5-25	28	375	365	170	220	204	193	12.5	23.11	56	13	165	155	4	125<134>		A2
	30-120	32	415	405	185	255	238	224	13	30.22	67	16	165	180	4	125<134>		A2
	120-200	40	450	440	230	310	297	276	15	42.2	81	18	165	219	5	125<134>		A2
	250-1800	50	655	645	280	390	361	330	19	51.4	96	26	165	276	5	125<134>		A2
1.5KW 2HP	5-30	32	435	435	185	255	238	224	13	30.22	67	16	193	180	4	135		A2
	30-100	40	470	470	230	310	297	276	15	42.2	81	18	193	219	5	135		A2
	100-200	50	560	560	280	390	361	330	19	51.4	96	26	193	276	5	135		A2
2.2KW 3HP	5-10	32	465	465	185	255	238	224	13	30.22	67	16	193	180	4	135		A2
	5-40	40	500	500	230	310	297	276	15	42.2	81	18	193	219	5	135		A2
	40-120	50	590	590	280	390	361	330	19	51.4	96	26	193	276	5	135		A2
3.7KW 5HP	5-10	40	515	515	230	310	297	276	15	42.2	81	18	225	219	5	148		A2
3.7KW 5HP	15-120	50	600	600	280	390	361	330	19	51.4	96	26	225	276	5	148		A2

1. A is a three-phase deceleration motor, and A1 is a three-phase deceleration brake motor.
2. 1/8HP single-phase size is the same as 1/4HP, 1/4HP～1HP single-phase size is the same as three-phase size.
3. <> is the brake size.
4. If you need to match the O-shaped lifting ring, the height dimension needs to be increased by 45mm.